How to Use Lidar in AirSim¶

AirSim supports Lidar for multirotors and cars.

The enablement of lidar and the other lidar settings can be configured via AirSimSettings json. Please see general sensors for information on configruation of general/shared sensor settings.

Enabling lidar on a vehicle¶

By default, lidars are not enabled. To enable lidar, set the SensorType and Enabled attributes in settings json. .. code-block:
```
"Lidar1": {
     "SensorType": 6,
     "Enabled" : true,
```
Multiple lidars can be enabled on a vehicle.

Lidar configuration¶

The following parameters can be configured right now via settings json.

Parameter	Description
NumberOfChannels	Number of channels/lasers of the lidar
Range	Range, in meters
PointsPerSecond	Number of points captured per second
RotationsPerSecond	Rotations per second
VerticalFOVUpper	Vertical FOV upper limit for the lidar, in degrees
VerticalFOVLower	Vertical FOV lower limit for the lidar, in degrees
X Y Z	Position of the lidar relative to the vehicle (in NED, in meters)
Roll Pitch Yaw	Roation of the lidar relative to the vehicle (in degrees)

e.g.,

Server side visualization for debugging¶

Be default, the lidar points are not drawn on the viewport. To enable the drawing of hit laser points on the viewport, please enable setting ‘DrawDebugPoints’ via settings json. e.g.,

Client API¶

Use getLidarData() API to retrieve the Lidar data.

The API returns a Point-Cloud as a flat array of floats along with a timestamp of the capture.
The floats represent [x,y,z] coordinate for each point hit within the range in the last scan.
The coordinates are in the local vehicle NED like all other AirSim APIs.

Python Examples¶

drone_lidar.py car_lidar.py

Coming soon¶

Visualization of lidar data on client side.